Telephone Keypad Key Sequence Parameters

Defines the key sequence on the phone's keypad for performing a call pick-up. Call pick-up allows the FXS endpoint to answer another telephone's incoming call by pressing this user-defined sequence of digits. When the user dials these digits (e.g., #77), incoming calls from another phone is forwarded to the user's phone.

The valid value is a string of up to 15 characters (0-9, #, and *). By default, no value is defined.

Note:

Defines the key sequence on the phone's keypad for configuring a phone number for the FXS phone that is connected to the device's FXS port.

To configure the phone number:

For example, if you configured the parameter to "*81" and you want the phone number to be 9764004, press the following keys on the keypad: *819764004#.

To delete the phone number, simply press the configured key sequence with the # key at the end (e.g., *81#).

The valid value is a string of up to 16 characters. By default, no value is defined.

Note:

Defines a prefix (e.g., digit 9 dialed for an external line) that when dialed, the device plays a secondary dial tone (i.e., stutter tone) to the FXS line and then starts collecting the subsequently dialed digits from the FXS line.

The valid value is a string of up to three characters, which can include digits (0-9), #, and * (e.g., *72). By default, no value is defined.

Note:

Enables the device to add the prefix string for accessing an external line (configured by the [Prefix2ExtLine] parameter) to the dialed (called) number as the prefix, which is sent to the IP destination (for Tel-to-IP calls).

Note:

Defines the hook-flash key sequence for FXS interfaces.

Note: The parameter is applicable only to FXS interfaces.

Defines the flash keys sequence timeout (in msec) that the device waits for digits after the user presses the flash button (flash hook + digit - when the [FlashKeysSequenceStyle] parameter is configured to 1 or 2).

The valid range is 100 to 5,000. The default is 2,000.

Defines the key sequence on the keypad to activate the immediate call forward option.

Defines the key sequence on the keypad to activate the forward on no answer option.

Defines the key sequence on the keypad to activate the forward on busy option.

Defines the key sequence on the keypad to activate the forward on 'busy or no answer' option.

Defines the key sequence on the keypad to activate the Do Not Disturb option (immediately reject incoming calls).

Note: You can't configure a call forwarding destination for this Do Not Disturb feature.

To activate the required call forward method, using the telephone:

Defines the key sequence on the keypad to deactivate any of the call forward options. After the sequence is pressed, a confirmation tone is heard.

Defines the key sequence on the keypad to activate the restricted Caller ID option. After the sequence is pressed, a confirmation tone is heard.

Defines the key sequence on the keypad to deactivate the restricted Caller ID option. After the sequence is pressed, a confirmation tone is heard.

Defines the key sequence on the keypad to activate the delayed hotline option.
To activate the delayed hotline option from the telephone:

Defines the key sequence on the keypad to deactivate the delayed hotline option. After the sequence is pressed, a confirmation tone is heard.

Defines the key sequence on the keypad to activate the Call Waiting option. After the sequence is pressed, a confirmation tone is heard.

Defines the key sequence on the keypad to deactivate the Call Waiting option. After the sequence is pressed, a confirmation tone is heard.

Defines the key sequence on the keypad to activate the reject anonymous call option, whereby the device rejects incoming anonymous calls. After the sequence is pressed, a confirmation tone is heard.